The voltage reading on the voltmeter V in the circuit shown below will be:
1. zero
2. 100 V
3. 200 V
4. 300 V
In a step-up transformer, the turn ratio is 1:2. A Leclanche cell (e.m.f. 1.5V) is connected across the primary coil. The voltage developed in the secondary coil would be-
1. 3.0 V
2. 0.75 V
3. 1.5 V
4. Zero
A 220 V, 50 Hz ac source is connected to an inductance of 0.2 H and a resistance of 20 ohms in series. What is the current in the circuit :
1. 10A
2. 5A
3. 33.3A
4. 3.33A
When the speed of a dc motor increases the armature current
(1) Increases
(2) Decreases
(3) Does not change
(4) Increases and decreases continuously
An electric motor operating on a 60 V dc supply draws a current of 10 A. If the efficiency of the motor is 50%, the resistance of its winding is
(1) 3Ω
(2) 6Ω
(3) 15Ω
(4) 30Ω
The potential difference V and the current i flowing through an instrument in an ac circuit of frequency f are given by volts and I = 2 sin ωt amperes (where ω = 2πf). The power dissipated in the instrument is
(1) Zero
(2) 10 W
(3) 5 W
(4) 2.5 W
In an ac circuit, V and I are given by V = 100 sin (100 t) volts, . The power dissipated in circuit is
(1) 104 watt
(2) 10 watt
(3) 2.5 watt
(4) 5 watt
The impedance of a coil, when DC supply is replaced by AC supply:
1. will remain the same
2. will increase
3. will decrease
4. will be zero
A generator produces a voltage that is given by V = 240 sin 120 t, where t is in seconds. The frequency and r.m.s. voltage are
(1) 60 Hz and 240 V
(2) 19 Hz and 120 V
(3) 19 Hz and 170 V
(4) 754 Hz and 70 V