A vertical U-tube of uniform inner cross section, contains mercury in both its arms. A glycerin (density = 1.3 g/${\mathrm{cm}}^3$) column of length 10 cm is introduced into one of its arms. Oil of density 0.8 gm/${\mathrm{cm}}^3$ is poured into the other arm until the upper surfaces of the oil and glycerin are at the same horizontal level. Find the length of the oil column. [Density of mercury = 13.6 g/${\mathrm{cm}}^3$]  
                       
1. 10.4 cm
2. 8.2 cm
3. 7.2 cm
4. 9.6 cm

A triangular lamina of area A and height h is immersed in a liquid of density $\mathrm{\rho }$ in a vertical plane with its base on the surface of the liquid. The thrust on the lamina is:
1. $\frac{1}{2}\mathrm{A\rho gh}$                 

2. $\frac{1}{3}\mathrm{A\rho gh}$

3. $\frac{1}{6}\mathrm{A\rho gh}$                 

4. $\frac{2}{3}\mathrm{A\rho gh}$

If two liquids of same masses but densities ${\mathrm{\rho }}_1$ and ${\mathrm{\rho }}_2$ respectively are mixed, then density of mixture is given by

(1) $\mathrm{\rho }=\frac{{\mathrm{\rho }}_1+{\mathrm{\rho }}_2}{2}$                             

(2) $\mathrm{\rho }=\frac{{\mathrm{\rho }}_1+{\mathrm{\rho }}_2}{2{\mathrm{\rho }}_1{\mathrm{\rho }}_2}$

(3) $\mathrm{\rho }=\frac{2{\mathrm{\rho }}_1{\mathrm{\rho }}_2}{{\mathrm{\rho }}_1+{\mathrm{\rho }}_2}$                             

(4) $\mathrm{\rho }=\frac{{\mathrm{\rho }}_1{\mathrm{\rho }}_2}{{\mathrm{\rho }}_1+{\mathrm{\rho }}_2}$

The density $\mathrm{\rho }$ of water of bulk modulus B at a depth y in the ocean is related to the density at surface ${\mathrm{\rho }}_0$ by the relation

(1) $\mathrm{\rho }={\mathrm{\rho }}_0\left[1-\frac{{\mathrm{\rho }}_0\mathrm{gy}}{\mathrm{B}}\right]$                           

(2) $\mathrm{\rho }={\mathrm{\rho }}_0\left[1+\frac{{\mathrm{\rho }}_0\mathrm{gy}}{\mathrm{B}}\right]$

(3) $\mathrm{\rho }={\mathrm{\rho }}_0\left[1+\frac{\mathrm{B}}{{\mathrm{\rho }}_0\mathrm{gy}}\right]$                             

(4) $\mathrm{\rho }={\mathrm{\rho }}_0\left[1-\frac{\mathrm{B}}{{\mathrm{\rho }}_0\mathrm{gy}}\right]$

With rise in temperature, density of a given body changes according to one of the following relations

(a) $\mathrm{\rho }={\mathrm{\rho }}_0\left[1+\mathrm{\gamma } \mathrm{d\theta }\right]$                        (b) $\mathrm{\rho }={\mathrm{\rho }}_0\left[1-\mathrm{\gamma } \mathrm{d\theta }\right]$

(c) $\mathrm{\rho }={\mathrm{\rho }}_0\mathrm{\gamma } \mathrm{d\theta }$                                (d) $\mathrm{\rho }={\mathrm{\rho }}_0/\mathrm{\gamma } \mathrm{d\theta }$

For the figures given below, the correct observation is:
              

A given shaped glass tube having uniform cross section is filled with water and is mounted on a rotatable shaft as shown in figure. If the tube is rotated with a constant angular velocity $\mathrm{\omega }$ then

(1) Water levels in both sections A and B go up

(2) Water level in Section A goes up and that in B comes down

(3) Water level in Section A comes down and that in B it goes up

(4) Water levels remains same in both sections

An iceberg of density 900 kg/${\mathrm{m}}^3$ is floating in water of density 1000 Kg/${\mathrm{m}}^3$. The percentage of volume of ice-cube outside the water is: 
1. 20%                                       
2. 35%
3. 10%                                       
4. 25%

A log of wood of mass 120 Kg floats in water. The weight that can be put on the raft to make it just sink, should be (density of wood = 600 Kg/${\mathrm{m}}^3$) 
(1) 80 Kg                                                 

(2) 50 Kg

(3) 60 Kg                                                 

(4) 30 Kg

A hemispherical bowl just floats without sinking in a liquid of density $1.2\times {10}^3$ $\mathrm{kg}/{\mathrm{m}}^3$. If the outer diameter and the density of the material of the bowl are 1 m and $2\times {10}^4$ $\mathrm{kg}/{\mathrm{m}}^3$ respectively, then the inner diameter of the bowl will be:
1. 0.94 m
2. 0.97 m
3. 0.98 m
4. 0.99 m