L, C and R represent physical quantities inductance, capacitance and resistance respectively. The combination representing the dimension of frequency will be:
1. LC
2. (LC)–1/2
3.
4.
In an ac circuit, a resistance of R ohm is connected in series with an inductance L. If the phase angle between voltage and current is 45°, the value of inductive reactance will be:
1. | \(\frac{R}{4}\) |
2. | \(\frac{R}{2}\) |
3. | R |
4. | Cannot be found with the given data |
The phase difference between the current and voltage of LCR circuit in series combination at resonance is
(1) 0
(2) π/2
(3) π
(4) –π
In a series resonant circuit, the ac voltage across resistance R, inductance L and capacitance C are 5 V, 10 V and 10 V respectively. The ac voltage applied to the circuit will be
(1) 20 V
(2) 10 V
(3) 5 V
(4) 25 V
In a series LCR circuit, resistance R = 10Ω and the impedance Z = 20Ω. The phase difference between the current and the voltage is
(1) 30°
(2) 45°
(3) 60°
(4) 90°
In the circuit shown below, the ac source has voltage volts with ω = 2000 rad/sec.
The amplitude of the current is closest to:
1. 2 A
2. 3.3 A
3.
4.
In an ac circuit the reactance of a coil is times its resistance, the phase difference between the voltage across the coil to the current through the coil will be
(1) π/3
(2) π/2
(3) π/4
(4) π/6
The capacity of a pure capacitor is 1 farad. In dc circuits, its effective resistance will be
(1) Zero
(2) Infinite
(3) 1 ohm
(4) 1/2 ohm
The power factor of an ac circuit having resistance (R) and inductance (L) connected in series and an angular velocity ω is
(1)
(2)
(3)
(4)
An inductor of inductance L and resistor of resistance R are joined in series and connected by a source of frequency ω. The power dissipated in the circuit is:
1.
2.
3.
4.