A bucket tied at the end of a 1.6 m long string is whirled in a vertical circle with constant speed. What should be the minimum speed so that the water from the bucket does not spill, when the bucket is at the highest position (Take g = 10 m/s²) 

(1) 4 m/sec

(2) 6.25 m/sec

(3) 16 m/sec

(4) None of the above

A 1 kg stone at the end of 1 m long string is whirled in a vertical circle at constant speed of 4 m/sec. The tension in the string is 6 N, when the stone is at (g = 10 m/sec²) 

1. Top of the circle

2. Bottom of the circle

3. Half way down

4. None of the above

The tension in the string revolving in a vertical circle with a mass m at the end which is at the lowest position 

(1) $\frac{m{v}^2}{r}$

(2) $\frac{m{v}^2}{r}-mg$

(3) $\frac{m{v}^2}{r}+mg$

(4) mg

A coin, placed on a rotating turn-table slips, when it is placed at a distance of 9 cm from the centre. If the angular velocity of the turn-table is trippled, it will just slip, if its distance from the centre is 

(1) 27 cm

(2) 9 cm

(3) 3 cm

(4) 1 cm

A body of mass 0.4 kg is whirled in a vertical circle making 2 rev/sec. If the radius of the circle is 2 m, then tension in the string when the body is at the top of the circle, is 

(1) 41.56 N

(2) 89.86 N

(3) 109.86 N

(4) 122.4 N

A bucket full of water is revolved in vertical circle of radius 2m. What should be the maximum time-period of revolution so that the water doesn't fall off the bucket ?

(1) 1 sec

(2) 2 sec

(3) 3 sec

(4) 4 sec

A tube of length L is filled completely with an incompressible liquid of mass M and closed at both the ends. The tube is then rotated in a horizontal plane about one of its ends with a uniform angular velocity ω. The force exerted by the liquid at the other end is 

1. $\frac{ML{\omega }^2}{2}$

2. $ML{\omega }^2$

3. $\frac{ML{\omega }^2}{4}$

4. $\frac{M{L}^2{\omega }^2}{2}$

A car is moving in a circular horizontal track of radius 10 m with a constant speed of 10 m/sec. A plumb bob is suspended from the roof of the car by a light rigid rod of length 1.00 m. The angle formed by the rod with respect to the vertical is:

A string of length L is fixed at one end and carries a mass M at the other end. The string makes 2/π revolutions per second around the vertical axis through the fixed end as shown in the figure, then tension in the string is 

(1) ML

(2) 2 ML

(3) 4 ML

(4) 16 ML

A long horizontal rod has a bead which can slide along its length, and initially placed at a distance L from one end A of the rod. The rod is set in angular motion about A with constant angular acceleration $\alpha$. If the coefficient of friction between the rod and the bead is μ, and gravity is neglected, then the time after which the bead starts slipping is

(1) $\sqrt{\frac{\mu }{\alpha }}$

(2) $\frac{\mu }{\sqrt{\alpha }}$

(3) $\frac{1}{\sqrt{\mu \alpha }}$

(4) Infinitesimal