If a current I given by flows in an ac circuit across which an ac potential of has been applied, then the power consumption P in the circuit will be
(1)
(2)
(3)
(4) P = 0
A resistance of \(20~ \mathrm{ohms}\) is connected to a source of an alternating potential, \(V=220sin(100 \pi t).\) The time taken by the current to change from its peak value to its r.m.s value will be:
1. | \( 0.2~ \mathrm{sec}\) | 2. | \( 0.25~ \mathrm{sec}\) |
3. | \(25 \times10^{-3}~ \mathrm{sec}\) | 4. | \(2.5 \times10^{-3}~ \mathrm{sec}\) |
An alternating current of frequency ‘f’ is flowing in a circuit containing a resistance R and a choke L in series. The impedance of this circuit will be:
1. R + 2πfL
2.
3.
4.
A resistance of 300 Ω and an inductance of henry are connected in series to an ac voltage of 20 volts and a 200 Hz frequency. The phase angle between the voltage and current will be:
1.
2.
3.
4.
In a region of uniform magnetic induction B = 10–2 tesla, a circular coil of radius 30 cm and resistance π2 ohm is rotated about an axis that is perpendicular to the direction of B and which forms a diameter of the coil. If the coil rotates at 200 rpm the amplitude of the alternating current induced in the coil is :
(1) 4π2 mA
(2) 30 mA
(3) 6 mA
(4) 200 mA
In a LCR circuit having L = 8.0 henry, C = 0.5 μF and R = 100 ohm in series. The resonance frequency in radian per second is
(1) 600 radian/second
(2) 600 Hz
(3) 500 radian/second
(4) 500 Hz
The impedance of a circuit consists of 3 ohm resistance and 4 ohm reactance. The power factor of the circuit is :
(1) 0.4
(2) 0.6
(3) 0.8
(4) 1.0
The power factor of a good choke coil is:
(1) Nearly zero
(2) Exactly zero
(3) Nearly one
(4) Exactly one
L, C and R represent physical quantities inductance, capacitance and resistance respectively. The combination representing the dimension of frequency will be:
1. LC
2. (LC)–1/2
3.
4.
In an ac circuit, a resistance of R ohm is connected in series with an inductance L. If the phase angle between voltage and current is 45°, the value of inductive reactance will be:
1. | \(\frac{R}{4}\) |
2. | \(\frac{R}{2}\) |
3. | R |
4. | Cannot be found with the given data |