Figure (i) shows a conducting loop being pulled out of a magnetic field with a speed v. Which of the four plots shown in figure (ii) may represent the power delivered by the pulling agent as a function of the speed v

(1) a

(2) b

(3) c

(4) d

A rectangular loop is being pulled at a constant speed v, through a region of certain thickness d, in which a uniform magnetic field B is set up. The graph between position x of the right-hand edge of the loop and the induced emf E will be-

(1)  (2)

(3)  (4)

The current i in an induction coil varies with time t according to the graph shown in figure. Which of the following graphs shows the induced emf (e) in the coil with time

(1)               (2)
(3)                 (4)

Switch S of the circuit shown in the figure is closed at t = 0. If e denotes the induced emf in L and i denotes the current flowing through the circuit at time t, then which of the following graphs is correct?

1.		2.
3.		4.

A square loop of side 5 cm enters a magnetic field with 1 cms^-1. The front edge enters the magnetic field at t = 0 then which graph best depicts emf

(1)

(2)

(3)

(4)

If induction of magnetic field at a point is B and energy density is U, then which of the following graphs is correct?

1. 

2. 

3. 
4. 

A long solenoid of diameter 0.1m has 2$\times {10}^4$ turns per meter. At the centre of the solenoid, a coil of 100 turns and radius 0.01m is placed with its axis coinciding with the solenoid's axis.  The current in the solenoid reduces at a constant rate to 0 A from 4A in 0.05s. If the resistance of the coil is $10{\pi }^2\Omega$, the total charge flowing through the coil during this time is 

1. 32$\mathrm{\pi \mu C}$

2. 16$\mu C$

3. 32$\mu C$

4. 16$\mathrm{\pi \mu C}$

A uniform magnetic field is restricted within a region of radius r. The magnetic field changes with time at a rate $\frac{dB}{dt}$. Loop 2 of radius R is outside the region of magnetic field as shown in the figure. Then the emf generated is-

(1) zero in loop 1 and zero in loop 2

(2) $-\frac{dB}{dt}{\mathrm{\pi r}}^2$ $\mathrm{in}$ $\mathrm{loop}$ $1$ $\mathrm{and}-\frac{\mathrm{dB}}{\mathrm{dt}}{\mathrm{\pi r}}^2$ $\mathrm{in}$ $\mathrm{loop}$ $2$

(3) $-\frac{dB}{dt}{\mathrm{\pi r}}^2$ $\mathrm{in}$ $loop$ $1$ $and$ $zero$ $\mathrm{in}$ $\mathrm{loop}$ $2$

(4) $\frac{2dB}{dt}{\mathrm{\pi r}}^2$ $\mathrm{in}$ $loop$ $1$ $and$ $zero$ $\mathrm{in}$ $\mathrm{loop}$ $2$

An electron moves on a straight-line path XY as shown. The abcd is a coil adjacent to the path of the electron. What will be the direction of the current, if any induced in the coil?
            

A wire loop is rotated in a magnetic field. The frequency of change of direction of the induced emf is

(1) once per revolution

(2) twice per revolution

(3) four times per revolution

(4) six times per revolution